Or leave us a private message
Ingen lignende emner blev fundet.
0
Færdig
unintuative. Couldnt make workflow variables inputs
Until I used it in the workflow. This does makes sense but typically I would design the interface to my workflow and then implement bit by bit. I may only need the 3rd input param later on and Im still testing the first bits. But I cant pass this until later.
think of it this way. When you define an interface method you dont make them parameterless you generally know what you want to achieve. Perhaps a hint popup to let us know
think of it this way. When you define an interface method you dont make them parameterless you generally know what you want to achieve. Perhaps a hint popup to let us know
Svar
Gandalf
10 år siden
We agree. There is a quite a bit that needs to be done to the variable list.
Thanks for the idea.
Thanks for the idea.
0
Færdig
make connectors bigger please
When dragging flow lines from one action / state to another or moving them around its very hard sometimes to drag the connector, esp FROM a decision. if the area you drag from was bigger would make for a faster easier UI experience.
Svar
Gandalf
10 år siden
We are rehosting WWF. Unfortunatley we cant get access to everything at a design level.
We will have another crack at the altering the design surface automaticaly.
We will have another crack at the altering the design surface automaticaly.
0
Fast
starting warewolf from the shortcut when the server is stopped doesnt launch the designer
stop the service
close the designer
click the designer shortcut, you will be prompted to start the warewolf service. Click yes
The service starts
The designer does not
Click short cut again it starts fine.
Trivial and minor annoyance bug :)
close the designer
click the designer shortcut, you will be prompted to start the warewolf service. Click yes
The service starts
The designer does not
Click short cut again it starts fine.
Trivial and minor annoyance bug :)
0
Fast
sp_helpText 'myProc' returns a sql error, I then cant reference ANY procs
if sp_helptext 'my proc' fails in sql then you cant select an action on the "new database service" tab. Running profiler I see that you are doing this for each of my procs. If one fails Im stuck
perhaps eating the bad ones and listing them as "problematic" at the end would be a good idea so I can carry on working on the other procs.
This error comes up in warewold designer AND sql management studio so its a sql error not an app error but the app handles it in a less than ideal manner.
Error : The database name component of the object qualifier must be the name of the current database.
perhaps eating the bad ones and listing them as "problematic" at the end would be a good idea so I can carry on working on the other procs.
This error comes up in warewold designer AND sql management studio so its a sql error not an app error but the app handles it in a less than ideal manner.
Error : The database name component of the object qualifier must be the name of the current database.
0
Færdig
Unload external dlls from the designer
I create a class library. I firstly discover that you cant return .Net basic types (string, int, bool etc) once I returned a class things were fine. Perhaps this needs to be in a hint :)
However in discovering this I rebuilt my dll a number of times. I couldnt copy it to the place I had referenced because warewolf has a handle to that DLL. Im assuming you host components like this in a separate appDomain so if you give me the ability to recycle that so I can do a build / deploy cycle without me having to shutdown warewolf would be great. If you can already do this and I just havnt figured out how, ... well then shame on me :)
However in discovering this I rebuilt my dll a number of times. I couldnt copy it to the place I had referenced because warewolf has a handle to that DLL. Im assuming you host components like this in a separate appDomain so if you give me the ability to recycle that so I can do a build / deploy cycle without me having to shutdown warewolf would be great. If you can already do this and I just havnt figured out how, ... well then shame on me :)
0
Færdig
decision trees getting cluttered
Assume a simple credit matrix. Based on your income you will get 1 of 3 interest rates.
Income > 10000 goes to the 1st outcome, >8000 the 2nd and > 5000 the third.
In the current version you have to make a tree looking like the left pic in the diagram.
If you attached priorities to a decision you could make it look like the second diagram. Say your income is 9000, you will fail the first check but pass both 2 and 3, however if you have a priority you would pass the income > 8000 check and stop evaluation at that point. Maybe a useful idea? Things like risk pricing models would benefit greatly from this and the designer space would look far less cluttered
Income > 10000 goes to the 1st outcome, >8000 the 2nd and > 5000 the third.
In the current version you have to make a tree looking like the left pic in the diagram.
If you attached priorities to a decision you could make it look like the second diagram. Say your income is 9000, you will fail the first check but pass both 2 and 3, however if you have a priority you would pass the income > 8000 check and stop evaluation at that point. Maybe a useful idea? Things like risk pricing models would benefit greatly from this and the designer space would look far less cluttered
Svar
Gandalf
10 år siden
Without the pictures mentioned I am left to guess.
My guess is you are talking about bundling up individual decisions into a single decision tree activity that would act like a switch.
Is this correct?
My guess is you are talking about bundling up individual decisions into a single decision tree activity that would act like a switch.
Is this correct?
0
Færdig
Decisions should have a heading. Just showing the first condition is less than ideal.
If I have vars, A and B (type bool) I have something like
if A==1
AND IF B==0
the decision reads "If A==1" in the designer canvas which is acttual misleading
if A==1
AND IF B==0
the decision reads "If A==1" in the designer canvas which is acttual misleading
Svar
Gandalf
12 år siden
Thanks Paul. The WWF designer limits the space that can be used there. We felt it was better to put in what you can rather than nothing at all as a default.
We also added the ability for you to put the text there that you want (check the bottom of the decision) so you can overide the default.
We also added the ability for you to put the text there that you want (check the bottom of the decision) so you can overide the default.
0
Besvaret
Performance of the framework
Just one question from me is around the performance of this framework.
Can you comment on comparing the performance between this framework and using
native entity and mvc frameworks for a project?
Svar
anonymous
12 år siden
I cannot give performance
comparisons of Warewolf vs MVC and Entity Framework.
Currently, Warewolf is intended to augment your existing development stack not replace it.
We have focused on enabling simple and quick SOA by allowing DLLs, Web services and Stored Procedures to be quickly exposed and orchestrated in Workflows that can be invoked in both your Data and Business Layers.
We allow for Web and T-SQL invocation methods.
You can find out more detail on Warewolf’s intended use and general architecture here : http://warewolf.io/architecture-documentation.php
You can find out more on Web and T-SQL invocation by looking at the Samples directory where you installed Warewolf. E.G. C:\Program Files (x86)\Warewolf
Currently, Warewolf is intended to augment your existing development stack not replace it.
We have focused on enabling simple and quick SOA by allowing DLLs, Web services and Stored Procedures to be quickly exposed and orchestrated in Workflows that can be invoked in both your Data and Business Layers.
We allow for Web and T-SQL invocation methods.
You can find out more detail on Warewolf’s intended use and general architecture here : http://warewolf.io/architecture-documentation.php
You can find out more on Web and T-SQL invocation by looking at the Samples directory where you installed Warewolf. E.G. C:\Program Files (x86)\Warewolf
Svar
anonymous
12 år siden
You need to use it at your service layer. All Workflows are hosted as web services that can return XML or JSON data.
For example you have a workflow called MyWorkflow you want to invoke from C#. You need to use a WebRequest to invoke the Warewolf service via a URL like http://localhost:3142/services/MyWorkflow.xml
You can then take the response data and parse the XML into an object.
Or you could change the extension from .xml to .json like http://localhost:3142/services/MyWorkflow.json
This will cause the service to return JSON data you can convert to POCO object with a JSON libary like the one here http://james.newtonking.com/json
you can then use this POCO in your C# application.
For example you have a workflow called MyWorkflow you want to invoke from C#. You need to use a WebRequest to invoke the Warewolf service via a URL like http://localhost:3142/services/MyWorkflow.xml
You can then take the response data and parse the XML into an object.
Or you could change the extension from .xml to .json like http://localhost:3142/services/MyWorkflow.json
This will cause the service to return JSON data you can convert to POCO object with a JSON libary like the one here http://james.newtonking.com/json
you can then use this POCO in your C# application.
Svar
anonymous
12 år siden
All workflows are re-usable via the Explorer in the Studio.
You just need to drag it from the explorer onto your new workflow to re-use it.
Be sure to map your inputs and outputs when re-using a workflow.
You just need to drag it from the explorer onto your new workflow to re-use it.
Be sure to map your inputs and outputs when re-using a workflow.
Kundesupport af UserEcho
