Or leave us a private message
Схожі теми не знайдені.
0
Not a bug
Feedback tool doesn't have "send" button
I tried to use the feedback tool to send some feedback about the Explorer. I recorded and filled in comments but the only buttons available were "Cancel" and "Go to Community".
I am not sure if my feedback was sent to you as there was a long lag after clicking "Go to Community". Then the dialogue box closed and I was brought here. See attaches screengrab,
I am not sure if my feedback was sent to you as there was a long lag after clicking "Go to Community". Then the dialogue box closed and I was brought here. See attaches screengrab,
0
Виконано
data transform and validation
I have a file from a payment processor with my debit responses.
There are 13k (6mn text file) lines in this file.
From time to time I get files that have bogus lines (blank lines you already cater for)
but lines that are badly formatted
Example (muchly simplieifed
File structure is as follows
first 13 chars ID NO
second 10 Surname
third 4 some response code
so example GOOD file would look as follows
9999999999999MYSURNAME 0010
8888888888888BlaName 0010
7777777777777 Name 0010
using the transform I can get this into a recordset really easily. I can the foreach over it or whatever. Happy days.
However then you get this
9999999999999MYSURNAME 0010
Crap Data
8888888888888BlaName 0010
7777777777777 Name 0010
Now the transform tool does its best but when it gets to the 2nd row it sticks "Crap Data" into the rs().IDNo and then rs().Surname is "888888888B"
I want to tell the transform to make its best effort up until it finds (in my case) a line feed. Perhaps some companies would use a char to denote end of line.
If I can do this I can then take my 13k entries and I can filter out the BAD ones and do something with say the 3 lines that are invalid.
PS Id really like to email the bad ones to somebody :)
Is there any way to attempt to solve my current use case? Fixed delimited files are common when dealing with financial institutions and tho bulk insert in sql may be faster id rather take a bit longer and have the ability to handle error cases (try finding a prob in a 13k lines file when using bulk insert :)
- P
There are 13k (6mn text file) lines in this file.
From time to time I get files that have bogus lines (blank lines you already cater for)
but lines that are badly formatted
Example (muchly simplieifed
File structure is as follows
first 13 chars ID NO
second 10 Surname
third 4 some response code
so example GOOD file would look as follows
9999999999999MYSURNAME 0010
8888888888888BlaName 0010
7777777777777 Name 0010
using the transform I can get this into a recordset really easily. I can the foreach over it or whatever. Happy days.
However then you get this
9999999999999MYSURNAME 0010
Crap Data
8888888888888BlaName 0010
7777777777777 Name 0010
Now the transform tool does its best but when it gets to the 2nd row it sticks "Crap Data" into the rs().IDNo and then rs().Surname is "888888888B"
I want to tell the transform to make its best effort up until it finds (in my case) a line feed. Perhaps some companies would use a char to denote end of line.
If I can do this I can then take my 13k entries and I can filter out the BAD ones and do something with say the 3 lines that are invalid.
PS Id really like to email the bad ones to somebody :)
Is there any way to attempt to solve my current use case? Fixed delimited files are common when dealing with financial institutions and tho bulk insert in sql may be faster id rather take a bit longer and have the ability to handle error cases (try finding a prob in a 13k lines file when using bulk insert :)
- P
+2
Thanks
I like the latest release
Great work guys. The latest release is snappy with my cryptsy.com data feeds. I just need psql support to get proper timings against my Java import process. And scheduling would be nice too.
0
Виконано
make connectors bigger please
When dragging flow lines from one action / state to another or moving them around its very hard sometimes to drag the connector, esp FROM a decision. if the area you drag from was bigger would make for a faster easier UI experience.
Відповідь
Gandalf
10 років тому
We are rehosting WWF. Unfortunatley we cant get access to everything at a design level.
We will have another crack at the altering the design surface automaticaly.
We will have another crack at the altering the design surface automaticaly.
0
Fixed
starting warewolf from the shortcut when the server is stopped doesnt launch the designer
stop the service
close the designer
click the designer shortcut, you will be prompted to start the warewolf service. Click yes
The service starts
The designer does not
Click short cut again it starts fine.
Trivial and minor annoyance bug :)
close the designer
click the designer shortcut, you will be prompted to start the warewolf service. Click yes
The service starts
The designer does not
Click short cut again it starts fine.
Trivial and minor annoyance bug :)
0
Є відповідь
Performance of the framework
Just one question from me is around the performance of this framework.
Can you comment on comparing the performance between this framework and using
native entity and mvc frameworks for a project?
Відповідь
anonymous
11 років тому
I cannot give performance
comparisons of Warewolf vs MVC and Entity Framework.
Currently, Warewolf is intended to augment your existing development stack not replace it.
We have focused on enabling simple and quick SOA by allowing DLLs, Web services and Stored Procedures to be quickly exposed and orchestrated in Workflows that can be invoked in both your Data and Business Layers.
We allow for Web and T-SQL invocation methods.
You can find out more detail on Warewolf’s intended use and general architecture here : http://warewolf.io/architecture-documentation.php
You can find out more on Web and T-SQL invocation by looking at the Samples directory where you installed Warewolf. E.G. C:\Program Files (x86)\Warewolf
Currently, Warewolf is intended to augment your existing development stack not replace it.
We have focused on enabling simple and quick SOA by allowing DLLs, Web services and Stored Procedures to be quickly exposed and orchestrated in Workflows that can be invoked in both your Data and Business Layers.
We allow for Web and T-SQL invocation methods.
You can find out more detail on Warewolf’s intended use and general architecture here : http://warewolf.io/architecture-documentation.php
You can find out more on Web and T-SQL invocation by looking at the Samples directory where you installed Warewolf. E.G. C:\Program Files (x86)\Warewolf
Відповідь
anonymous
11 років тому
You need to use it at your service layer. All Workflows are hosted as web services that can return XML or JSON data.
For example you have a workflow called MyWorkflow you want to invoke from C#. You need to use a WebRequest to invoke the Warewolf service via a URL like http://localhost:3142/services/MyWorkflow.xml
You can then take the response data and parse the XML into an object.
Or you could change the extension from .xml to .json like http://localhost:3142/services/MyWorkflow.json
This will cause the service to return JSON data you can convert to POCO object with a JSON libary like the one here http://james.newtonking.com/json
you can then use this POCO in your C# application.
For example you have a workflow called MyWorkflow you want to invoke from C#. You need to use a WebRequest to invoke the Warewolf service via a URL like http://localhost:3142/services/MyWorkflow.xml
You can then take the response data and parse the XML into an object.
Or you could change the extension from .xml to .json like http://localhost:3142/services/MyWorkflow.json
This will cause the service to return JSON data you can convert to POCO object with a JSON libary like the one here http://james.newtonking.com/json
you can then use this POCO in your C# application.
+2
Виконано
Future features - UI? Form builder?
Hi
What new features have you got in the pipeline?
My company is looking for something like Warewolf but with a client facing UI, something like K2 Smart Forms.
Have you got any plans for this?
Thanks,
What new features have you got in the pipeline?
My company is looking for something like Warewolf but with a client facing UI, something like K2 Smart Forms.
Have you got any plans for this?
Thanks,
Відповідь
Gandalf
11 років тому
Absolutely. This is the logical next step for the system and plans are underway for a pre v1 release of this functionality. If you have any requirements, please leave them as comments here or as suggestions.
0
Є відповідь
Pricing
We're want to use Warewolf in an upcoming project but are concerned about future pricing implications once it's out of beta. I don't want to get dependant and then get hit with big licencing fees.
What are your plans for pricing in the future?
What are your plans for pricing in the future?
Відповідь
Gandalf
11 років тому
Great question that deserves a simple answer.
We do not know.
We want to keep Warewolf Free. We see it as a tool in the back pocket of every dev team. Because we cannot guarantee what the long term pricing is at this stage, and we understand your concern, we will guarantee that it will never be above $500 per year for installations prior to licencing.
We do not know.
We want to keep Warewolf Free. We see it as a tool in the back pocket of every dev team. Because we cannot guarantee what the long term pricing is at this stage, and we understand your concern, we will guarantee that it will never be above $500 per year for installations prior to licencing.
0
Є відповідь
Support
Hi Warewolf
Down the line, will you offer other kinds of support for your application, or will it just be this portal?
Thanks
Down the line, will you offer other kinds of support for your application, or will it just be this portal?
Thanks
Відповідь
Gandalf
11 років тому
We will offer support. Either through this forum, the community or if necessary contractually. If you would like to discuss further please send us your details and we will get in touch.
Служба підтримки клієнтів працює на UserEcho
