0
W trakcie analizy

WW 2.8.1.21 - Trigger using PreFetch function doesn't process all Rabbit Message

Wynand Vermaak wczoraj o 02:55 w Server / Execution Ostatnio zmodyfikowane przez Njabulo Nxele 21 hours ago 1

Good day,

I recently monitored RabbitMQ while the Ad Hoc Journey was executing. After the Ad Hoc Journey finished executing (confirmed by looking at the ServerLog) I can still see unack'ed messages in the relevant Rabbit queue.

I've seen it happen on a number of occasions and I'm wondering if the PreFetch function while running multiple containers (12 in the example below) doesn't lock some messages (21 as per the example below) as per screenshot below: 

Image 1063

execution server
0

Command Line Deploy

Anonim 3 tygodni temu w Server / Resources 0

How do I deploy from a batch file or command line rather than the Studio?

0
W trakcie analizy

When turning off trigger exception is raised in Warewolf log

Elmo 3 tygodni temu w Server / Execution zaktualizowano 3 tygodni temu 2

I am getting the following error when turning queues off. The queue was at a concurrency set as 1 then when I changed it to 0 and saved it errored in the Warewolf log.


2022-11-06 17:28:10,817 INFO - [Warewolf Info] - Save Trigger Queue Service
2022-11-06 17:28:11,323 ERROR - [Warewolf Error] - TriggersCatalog - Load - C:\ProgramData\Warewolf\Triggers\Queue\52e4dba3-73fa-4267-877a-fa4f493a1511.bite
System.Security.Cryptography.CryptographicException: Key not valid for use in specified state.

at System.Security.Cryptography.ProtectedData.Unprotect(Byte[] encryptedData, Byte[] optionalEntropy, DataProtectionScope scope)
at Warewolf.Security.Encryption.DpapiWrapper.Decrypt(String cipher)
at Dev2.Runtime.Hosting.TriggersCatalog.LoadQueueTriggerFromFile(String filename)
at Dev2.Runtime.Hosting.TriggersCatalog.Load()
2022-11-06 17:28:11,332 ERROR - [Warewolf Error] - TriggersCatalog - Load - C:\ProgramData\Warewolf\Triggers\Queue\667e5af4-c5a8-461b-b03d-c5683fe1fca0.bite
System.Security.Cryptography.CryptographicException: Key not valid for use in specified state.

at System.Security.Cryptography.ProtectedData.Unprotect(Byte[] encryptedData, Byte[] optionalEntropy, DataProtectionScope scope)
at Warewolf.Security.Encryption.DpapiWrapper.Decrypt(String cipher)
at Dev2.Runtime.Hosting.TriggersCatalog.LoadQueueTriggerFromFile(String filename)
at Dev2.Runtime.Hosting.TriggersCatalog.Load()
2022-11-06 17:28:11,340 ERROR - [Warewolf Error] - TriggersCatalog - Load - C:\ProgramData\Warewolf\Triggers\Queue\9923dc51-c138-4944-a7a4-06cb468f2e86.bite
System.Security.Cryptography.CryptographicException: Key not valid for use in specified state.

at System.Security.Cryptography.ProtectedData.Unprotect(Byte[] encryptedData, Byte[] optionalEntropy, DataProtectionScope scope)
at Warewolf.Security.Encryption.DpapiWrapper.Decrypt(String cipher)
at Dev2.Runtime.Hosting.TriggersCatalog.LoadQueueTriggerFromFile(String filename)
at Dev2.Runtime.Hosting.TriggersCatalog.Load()
2022-11-06 17:28:11,343 INFO - [00000000-0000-0000-0000-000000000000] - Trigger restarting 'f00a48f4-5348-490b-add4-3991c578c717'
2022-11-06 17:28:11,359 ERROR - [ at System.Diagnostics.Process.Kill()
at Warewolf.OS.ProcessMonitor.Kill()] - Access is denied
2022-11-06 17:28:11,371 INFO - [WarewolfLogger.exe] - Logging Server OnError, Error details:Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host.
2022-11-06 17:28:11,372 INFO - [WarewolfLogger.exe] - 11/6/2022 5:28:11 PM [Debug] Error while reading System.IO.IOException: Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host. ---> System.Net.Sockets.SocketException: An existing connection was forcibly closed by the remote host
2022-11-06 17:28:11,378 INFO - [WarewolfLogger.exe] - at System.Net.Sockets.Socket.EndReceive(IAsyncResult asyncResult)
2022-11-06 17:28:11,378 INFO - [WarewolfLogger.exe] - at System.Net.Sockets.NetworkStream.EndRead(IAsyncResult asyncResult)
2022-11-06 17:28:11,378 INFO - [WarewolfLogger.exe] - --- End of inner exception stack trace ---
2022-11-06 17:28:11,379 INFO - [WarewolfLogger.exe] - at System.Net.Sockets.NetworkStream.EndRead(IAsyncResult asyncResult)
2022-11-06 17:28:11,379 INFO - [WarewolfLogger.exe] - at System.Threading.Tasks.TaskFactory`1.FromAsyncCoreLogic(IAsyncResult iar, Func`2 endFunction, Action`1 endAction, Task`1 promise, Boolean requiresSynchronization)
2022-11-06 17:28:11,390 INFO - [Warewolf Info] - queue process died: ProfileCustomerBackBook(f00a48f4-5348-490b-add4-3991c578c717)

service
0
W trakcie analizy

Assigning recordsets within ForEach not working correctly

Elmo 1 miesiąc temu w Server / Execution zaktualizowano 1 miesiąc temu 1

In the for-each, there is a new record set being appended from a scalar variable output. 


Image 1043




And then I attempt to sum up the values in the recordset. It fails with an invalid calculate field. Please see the debug output - there should only be one record in the recordset.



debug execution tool variables workflow
+3
Ukończony

RabbitMQ Consumer Prefetch value

jigar patel 5 miesięcy temu w Server / Execution Ostatnio zmodyfikowane przez Njabulo Nxele 3 miesięcy temu 2

Hi Team, there is one suggestion to improve RabbitMQ consumer performance. We can divide the load with multiple consumer by specifying prefetch count value. If we are not specifying prefetch value that means single consumer have unlimited buffer means single consumer will pick all the data from queue.

Prefetch meaning "prefetch simply controls how many messages the broker allows to be outstanding at the consumer at a time. When set to 10, this means the broker will send 10 message, wait for the ack, then send the next."

References : 
https://www.rabbitmq.com/consumer-prefetch.html
https://www.cloudamqp.com/blog/how-to-optimize-the-rabbitmq-prefetch-count.html
https://stackoverflow.com/questions/65201334/rabbit-mq-prefetch-undestanding

Suggestion : Add prefetch configuration in trigger section of warewolf studio (i.e like trigger concurrency)


Please let me know if you need more help to understand.

+1
To nie jest błąd

UAT-2.7.5.0 - Getting hangfire error at the time of resume suspend tool

maya khambhayata 8 miesięcy temu w Server / Execution Ostatnio zmodyfikowane przez Njabulo Nxele 6 miesięcy temu 3

PriceIncreaseByMandate.bite
newjourney (2).log

In local environment, sometime it gives "Resume node not found" error. but After restart of warewolf service. it is working fine. Price increase journey have 2 suspend tool in workflow but both are working fine in local environment. But on Dev environment it is failing Randomly. Out of 10 it is failing almost 7 times. I am providing here, workflow and server log.

Yes it new workflow.

Hangfir giving below error: 

{"FailedAt":"2022-04-18T05:28:31.2801372Z","ExceptionType":"System.InvalidOperationException","ExceptionMessage":"Error resuming. ServiceAction is null for Resource ID:ae105df3-9dc5-437e-ba21-e93dd6a0f356","ExceptionDetails":"System.InvalidOperationException: Error resuming. ServiceAction is null for Resource ID:ae105df3-9dc5-437e-ba21-e93dd6a0f356 ---> System.Exception: Error resuming. ServiceAction is null for Resource ID:ae105df3-9dc5-437e-ba21-e93dd6a0f356\r\n --- End of inner exception stack trace ---\r\n at HangfireServer.ResumptionAttribute.OnPerformResume(PerformingContext context) in Y:\\WOLF-INST-COMREL\\Dev\\Warewolf.HangfireServer\\ResumptionAttribute.cs:line 94\r\n at Hangfire.Profiling.ProfilerExtensions.InvokeAction[TInstance](InstanceAction`1 tuple)\r\n at Hangfire.Profiling.SlowLogProfiler.InvokeMeasured[TInstance,TResult](TInstance instance, Func`2 action, String message)\r\n at Hangfire.Profiling.ProfilerExtensions.InvokeMeasured[TInstance](IProfiler profiler, TInstance instance, Action`1 action, String message)\r\n at Hangfire.Server.BackgroundJobPerformer.InvokePerformFilter(IServerFilter filter, PerformingContext preContext, Func`1 continuation)"}

0
To nie jest błąd

For each loop issue: All Recordset index values not passing into child workflow

Ashley Lewis 10 miesięcy temu w Server / Execution Ostatnio zmodyfikowane przez Siphamandla Dube 9 miesięcy temu 2

Hi,

I have noticed that All the values of recordset are not passing into child workflow for each loop. I have checked this same behavior into the Select & Apply tool and it's working fine.

Please check the sample attached workflows & issue into screenshot.

forloop_recordset_all_values_not_pass_issue....png
ForLoopIssue-MainWorkflow (1).bite
ForLoopIssue-ChildWorkflow (1).bite

Gandalf 5 months ago

It looks like the For Each is getting confused with 2 different recordset inputs: User(*) and Benefit(*)

Gandalf 5 months ago

Change For Each to use No. of Executes = 3 and see different result. This is from the tool handeling the replacement of * differently and incorectly.

Yogesh Rajpurohit yesterday at 9:13 a.m.

We have checked and found that the sequence of BenifitID in User Payload is incorrect so we changed the sequence and checked the result. Output is coming properly.

Attached are the Edited Workflows.

ForLoopIssue-ChildWorkflow (2).bite
ForLoopIssue-MainWorkflow (2).bite

execution server variables
0
Z odpowiedzią

Configure SSL certificate for port 3143?

Timothy Boyden 1 rok temu w Server Ostatnio zmodyfikowane przez Elmo 1 rok temu 2

How do you secure port 3143 with a real SSL certificate? Haven't been able to find any documentation on this. Using server version 2.6.2.0.

server
+1

Suspend Tool Failing

Anonim 1 rok temu w Server / Execution 0

There is a problem with the suspend tool. I have two workflows created in 2.6.6.0, one works fine and the other does not.

Works fine: SuspendToolTest

Does not work: suspendtest

suspendtest.bite
SuspendToolTest.bite


Image 975

Image 976

0

Warewolf-2.6.4: Trigger: On Local environment trigger is not picking the data from Rabbit MQ in most cases.

maya khambhayata 1 rok temu w Server 0

Discussion-20211022_124100-Meeting Recording.mp4 in Warewolf-2.6.4 version, I have created 4 triggers in local environment and set the concurrency to more than 1. It created the queue in RabbitMQ. While pushing the data to queue in RMQ. It is not picking data most of the time. I have to edit something in trigger and save again. For example i have to change concurrency from 2 to 3 OR 3 to 2. then only trigger is picking data from RMQ. Also checked with other team members too. They are also facing same issue. Here I am attaching video recording for same.