Or leave us a private message
Geen vergelijkbare onderwerpen gevonden.
0
Fixed
An item with the same key has already been added.
at System.ThrowHelper.ThrowArgumentException(ExceptionResource resource)
at System.Collections.Generic.Dictionary`2.Insert(TKey key, TValue value, Boolean add)
at System.Collections.Generic.Dictionary`2.Add(TKey key, TValue value)
at Infragistics.Collections.CollectionBase`1.AddItemSilently(Int32 index, T item)
at Infragistics.Collections.BindableItemCollection`1.AddBoundItem(Int32 index, T item)
at Infragistics.Collections.BindableItemCollection`1.GetItem(Int32 index)
at Infragistics.Collections.CollectionBase`1.get_Item(Int32 index)
at Infragistics.Controls.Menus.NodesManager.ResolveNodeForIndex(Int32 index)
at Infragistics.Controls.Menus.InternalNodesCollection.GetNodeForIndex(Int32 index, NodesManager currentManager, Int32 currentOffset, Int32 additionalOffset)
at Infragistics.Controls.Menus.InternalNodesCollection.GetNodeForIndex(Int32 index, NodesManager currentManager, Int32 currentOffset, Int32 additionalOffset)
at Infragistics.Controls.Menus.InternalNodesCollection.GetItem(Int32 index)
at Infragistics.Collections.CollectionBase`1.get_Item(Int32 index)
at Infragistics.Controls.Menus.Primitives.NodesPanel.MeasureOverride(Size availableSize)
at System.Windows.FrameworkElement.MeasureCore(Size availableSize)
at System.Windows.UIElement.Measure(Size availableSize)
at System.Windows.ContextLayoutManager.UpdateLayout()
at System.Windows.ContextLayoutManager.UpdateLayoutCallback(Object arg)
at System.Windows.Media.MediaContext.InvokeOnRenderCallback.DoWork()
at System.Windows.Media.MediaContext.FireInvokeOnRenderCallbacks()
at System.Windows.Media.MediaContext.RenderMessageHandlerCore(Object resizedCompositionTarget)
at System.Windows.Media.MediaContext.RenderMessageHandler(Object resizedCompositionTarget)
at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Int32 numArgs)
at System.Windows.Threading.ExceptionWrapper.TryCatchWhen(Object source, Delegate callback, Object args, Int32 numArgs, Delegate catchHandler)
at System.Collections.Generic.Dictionary`2.Insert(TKey key, TValue value, Boolean add)
at System.Collections.Generic.Dictionary`2.Add(TKey key, TValue value)
at Infragistics.Collections.CollectionBase`1.AddItemSilently(Int32 index, T item)
at Infragistics.Collections.BindableItemCollection`1.AddBoundItem(Int32 index, T item)
at Infragistics.Collections.BindableItemCollection`1.GetItem(Int32 index)
at Infragistics.Collections.CollectionBase`1.get_Item(Int32 index)
at Infragistics.Controls.Menus.NodesManager.ResolveNodeForIndex(Int32 index)
at Infragistics.Controls.Menus.InternalNodesCollection.GetNodeForIndex(Int32 index, NodesManager currentManager, Int32 currentOffset, Int32 additionalOffset)
at Infragistics.Controls.Menus.InternalNodesCollection.GetNodeForIndex(Int32 index, NodesManager currentManager, Int32 currentOffset, Int32 additionalOffset)
at Infragistics.Controls.Menus.InternalNodesCollection.GetItem(Int32 index)
at Infragistics.Collections.CollectionBase`1.get_Item(Int32 index)
at Infragistics.Controls.Menus.Primitives.NodesPanel.MeasureOverride(Size availableSize)
at System.Windows.FrameworkElement.MeasureCore(Size availableSize)
at System.Windows.UIElement.Measure(Size availableSize)
at System.Windows.ContextLayoutManager.UpdateLayout()
at System.Windows.ContextLayoutManager.UpdateLayoutCallback(Object arg)
at System.Windows.Media.MediaContext.InvokeOnRenderCallback.DoWork()
at System.Windows.Media.MediaContext.FireInvokeOnRenderCallbacks()
at System.Windows.Media.MediaContext.RenderMessageHandlerCore(Object resizedCompositionTarget)
at System.Windows.Media.MediaContext.RenderMessageHandler(Object resizedCompositionTarget)
at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Int32 numArgs)
at System.Windows.Threading.ExceptionWrapper.TryCatchWhen(Object source, Delegate callback, Object args, Int32 numArgs, Delegate catchHandler)
0
Fixed
Object reference not set to an instance of an object.
at Infragistics.Controls.Menus.Primitives.NodesPanel.RenderNode(XamDataTreeNode node, Double availableWidth)
at Infragistics.Controls.Menus.Primitives.NodesPanel.MeasureOverride(Size availableSize)
at System.Windows.FrameworkElement.MeasureCore(Size availableSize)
at System.Windows.UIElement.Measure(Size availableSize)
at System.Windows.ContextLayoutManager.UpdateLayout()
at System.Windows.ContextLayoutManager.UpdateLayoutCallback(Object arg)
at System.Windows.Media.MediaContext.InvokeOnRenderCallback.DoWork()
at System.Windows.Media.MediaContext.FireInvokeOnRenderCallbacks()
at System.Windows.Media.MediaContext.RenderMessageHandlerCore(Object resizedCompositionTarget)
at System.Windows.Media.MediaContext.RenderMessageHandler(Object resizedCompositionTarget)
at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Int32 numArgs)
at System.Windows.Threading.ExceptionWrapper.TryCatchWhen(Object source, Delegate callback, Object args, Int32 numArgs, Delegate catchHandler)
at Infragistics.Controls.Menus.Primitives.NodesPanel.MeasureOverride(Size availableSize)
at System.Windows.FrameworkElement.MeasureCore(Size availableSize)
at System.Windows.UIElement.Measure(Size availableSize)
at System.Windows.ContextLayoutManager.UpdateLayout()
at System.Windows.ContextLayoutManager.UpdateLayoutCallback(Object arg)
at System.Windows.Media.MediaContext.InvokeOnRenderCallback.DoWork()
at System.Windows.Media.MediaContext.FireInvokeOnRenderCallbacks()
at System.Windows.Media.MediaContext.RenderMessageHandlerCore(Object resizedCompositionTarget)
at System.Windows.Media.MediaContext.RenderMessageHandler(Object resizedCompositionTarget)
at System.Windows.Threading.ExceptionWrapper.InternalRealCall(Delegate callback, Object args, Int32 numArgs)
at System.Windows.Threading.ExceptionWrapper.TryCatchWhen(Object source, Delegate callback, Object args, Int32 numArgs, Delegate catchHandler)
0
Beantwoord
SignalR Connector
Hi!
I have a SignalR hub with some data that I want to set into warewolf variables and then use this variable value either to store or call other services/web api as a trigger.
Do I need to create a connector to accomplish this behavior?
In order to monitor this variable value, do I need to put this variable within a loop?
Thanks.
Antwoord
Gandalf
8 jaar geleden
Hi victor
Make the call to the URL of the service (Look above the workflow for this). Something like this:
In this example I have a folder called Examples with a workflow called Handler in it which is the workflow you can see on the design surface. In the Variables list on the right, I have set the two variables I want to use as Input so they can be accepted by the workflow. After that, I just use them, as in the decision.
Hope that helps.
+1
Under review
Run .exe with CMD line
Hello!! I'm trying to run a .exe file, but i can't see the screen! I know that the file is open, the work flow is fine, but i can't see the screen!! where is it??
Thank you very much for you time!
Antwoord
anonymous
8 jaar geleden
Hi,
So a solution for you given your process will be for you to start the other windows form application after the workflow completes.
So in your process would become:
1. A Windows form in c#, have a textbox to validate a email.
2. The submit button executes the workflow
3. The workflow do all the process and create a file with the result.
4. C# application from step 1 will start the next C# application after the workflow completes
Does this solution work for you? We will discuss your idea for the CMD line tools and possibly add it as an option.
Thanks
+1
Beantwoord
Xpath expression support for xml with namespace prefix
Hi Team,
We are evaluating the different open source ESBs, as we started with Warewolf.
Please let us know, if you have namespace support on xpath utility you have in control/tool box.
We have xml content that uses, namespace as prefix with xml node/element name.
Please help us to construct Xpath expression for the same.
thanks.
regards
Bala
0
Beantwoord
VB DLLs and Objects
I am fairly new to the Microsoft experience, but was wondering if the DLLs have to be C# or can they be VB to use in Warewolf? Can I create objects in the DLL and access them from Warewolf ?
+1
Beantwoord
Connecting Studio to Server
Hi,
I have downloaded the source code and currently have the server and studio running in visual studio. The problem I am having is that the studio can't find the server and throws an error. Do you have any advise to over come this issue.
Regards
Wayde
I have downloaded the source code and currently have the server and studio running in visual studio. The problem I am having is that the studio can't find the server and throws an error. Do you have any advise to over come this issue.
Regards
Wayde
0
Voltooid
Client Connector
I read that you use SignalR for communication between the server and studio. Are there any plans on using SignalR to create a Client Connector+Source Tool so that we can push content to or message connected client apps?
>Garrett
>Garrett
+2
Not a bug
Recursive Evaluation
After reading about how the Datalist caters to recursive evaluation I thought this was interesting and wanted to try it out.
From the technical documentation page:
"i.e. [[hello[[world]]]] would be recursively evaluated as [[hellobob]] where [[world]] had the value of “bob” and then [[hellobob]] as “my name is bob” where [[hellobob]] had the value “my name is bob” stored in it.
I decided to test this out myself. I created a variable [[hellobob]] and assigned the string "my name is bob" Then I created a variable [[world]] and assigned "bob". Finally I created a variable [[result]] and assigned [[hello[[world]]]]. To my disappointment I received a parse error.
I went back and added the variable [[hello]] and assigned "hello"
And then changed my assignment of [[result]] to [[[[hello]][[world]]]]
This produced the expected result. In the debug window it read my assignment as Variable [[result]] = New Value [[hellobob]] with the string "my name is bob" as its value.
I don't know if this is technically a bug since it did behave in a recursive manner when I tried the second time, but perhaps the documentation is wrong. When I set [[result]] to [[hello [[world]]]] It returned [[hello bob]] an unassigned variable. But with no space there, [[hello[[world]]]] results in a parse error.
From the technical documentation page:
"i.e. [[hello[[world]]]] would be recursively evaluated as [[hellobob]] where [[world]] had the value of “bob” and then [[hellobob]] as “my name is bob” where [[hellobob]] had the value “my name is bob” stored in it.
I decided to test this out myself. I created a variable [[hellobob]] and assigned the string "my name is bob" Then I created a variable [[world]] and assigned "bob". Finally I created a variable [[result]] and assigned [[hello[[world]]]]. To my disappointment I received a parse error.
I went back and added the variable [[hello]] and assigned "hello"
And then changed my assignment of [[result]] to [[[[hello]][[world]]]]
This produced the expected result. In the debug window it read my assignment as Variable [[result]] = New Value [[hellobob]] with the string "my name is bob" as its value.
I don't know if this is technically a bug since it did behave in a recursive manner when I tried the second time, but perhaps the documentation is wrong. When I set [[result]] to [[hello [[world]]]] It returned [[hello bob]] an unassigned variable. But with no space there, [[hello[[world]]]] results in a parse error.
Customer support service by UserEcho
